BEECKOSIL FINE
One-pack active silicate system to VOB/DIN 18363 2.4.1.Intended use
Ready-to-use one-pack water-glass paint with an absolutely mineral profile. For permanently representative façades made of render, brick, calcium silicate masonry and concrete. Thin with BEECK Fixative. Use BEECK Quartz Filler, alternatively Beeckosil Coarse, to apply a slurry base coat to substrates with hairline cracks and structural defects.Scope
for exteriorsProperties
- BEECK ASF® ActiveSilicateFormulation
- Maximum colourfastness A1 (BFS-MB No. 26)
- Moisture regulating
- Non film-forming
- Mould resistant due to alkalinity
- Economical to use
Technical Details
W24 value: |
< 0.08 kg/(m2h1/2) |
Sd value (H2O): |
< 0.02 m |
Density: |
1.50 kg / L |
pH value: |
11 |
Organic content: |
< 5 % |
Application rate: |
approx. 0.12 L/m² on a smooth substrate |
Container size
5 L / 12.5 L / 15 LColours
White, Off-White and the 200 ready-mixed colours of the BEECK Mineral Paint Colour Card. Tintable and full colour coatings with BEECK Full Colour Silicate PaintsProducts, which can be used together with this product:
-
FIXATIVE
Priming and binder for BEECK Silicate Paints including BEECK Pure Crystalline Finish -
QUARTZ FILLER
Fibre-reinforced priming coat for opaque or glazed silicate systems -
BEECKOSIL COARSE
Fine slurry base coat in the active silicate system to VOB/DIN 18363 2.4.1. -
FULL COLOUR SILICATE PAINT
For tinting BEECK one-pack silicate paints and for full colour painting and decorating -
ETCHING FLUID
Acidic concentrate for sinter skin removal on new renders