BEECKOSIL COARSE
Fine slurry base coat in the active silicate system to VOB/DIN 18363 2.4.1.Intended use
Levelling, quartz-filled priming and intermediate coat in the Beeckosil system on substrates with minor structural defects or hairline cracks. Thinning with BEECK Fixative. Ready-to-use paste. Same colour topcoat with Beeckosil Fine. Use render to repair façades with cracks, chipped surface or structural defects and slurry uniformly with BEECK Quartz Filler.Scope
for exteriorsProperties
- BEECK ASF® ActiveSilicateFormulation
- Texture grain 0.4 mm
- Bridges over hairline cracks and levelling effect
- Brightens up smooth surfaces
- Non film-forming
- Optimum silicification with substrate and topcoat
Technical Details
W24 value: | < 0.08 kg/(m2h1/2) |
Sd value (H2O): | < 0.01 m |
Density: | 1.58 kg / L |
pH value: | 11 |
Organic content: | < 5 % |
Application rate: | approx. 0.24 kg / m² per pass on a smooth substrate |
Container size
8 kg / 20 kgColours
White, Off-White and the 200 ready-mixed colours of the BEECK Mineral Paint Colour Card. Same colour topcoat in Beeckosil FineProducts, which can be used together with this product:
-
FIXATIVE
Priming and binder for BEECK Silicate Paints including BEECK Pure Crystalline Finish -
QUARTZ FILLER
Fibre-reinforced priming coat for opaque or glazed silicate systems -
BEECKOSIL FINE
One-pack active silicate system to VOB/DIN 18363 2.4.1. -
FULL COLOUR SILICATE PAINT
For tinting BEECK one-pack silicate paints and for full colour painting and decorating -
ETCHING FLUID
Acidic concentrate for sinter skin removal on new renders