FORMWORK OIL REMOVER
Water-thinnable cleaning concentrate for removing release agent residues from concreteIntended use
Concentrated, powerful special cleaner for removing spurious release agents (formwork release oil or wax) on new or un-treated, interior or exterior concrete surfaces. Efficient as an additive for high-pressure (jet) cleaning equipment, if necessary it can also be applied with a brush, e.g. in interior areas. Used for pore-deep cleaning of concrete walls and ceilings, to which an opaque or glazed coating of BEECK silicate paint is then applied.Scope
for exteriors + interiorsProperties
- Pore-deep cleaning capacity
- High-yield concentrate
- With no acid attack on mineral building materials
- Creates coating-compatible substrates
- Does not leave any cleaning film behind
- Can be washed off with clean water
- Biodegradable
Technical Details
Density: | 1,0 kg/L |
pH value: | 9 - 10 |
Application rate: | approx. 0,01 – 0,02 L / m² BEECK Formwork Oil Remover depending on the dilution ratio used and the degree of soiling |