PLASTER AND STONE HARDENER
Silicic acid ester preparation for the consolidation and strengthening of porous bricks and natural stoneIntended use
Penetrates deep into the crumbling, leached out building material and results in controlled consolidation and strengthening of the stone and joint by depositing mineral silica gel. Can be subsequently coloured, for example with BEECK Concrete / Stone Glaze. For commercial users only. Test on sample surface on site first to check effectiveness on building. Subsequent hydrophobing with BEECK SP Plus is possible.Scope
for exteriorsProperties
- Mineral binder deposition (silica gel)
- Without water repellency („OH“)
- High water vapour permeability
- Rewash with solvent
Technical Details
W24 value: | > 0.5 kg / (m2h1/2) |
Sd value (H2O): | < 0.08 m |
Density: | 1.00 kg / L |
Solvent content: | 99 % |
Application rate: | approx. 0.5 – 10 L / m²; to be determined by applying on a test surface |
Container size
5 L / 30 LColours
Colourless-transparent to slightly yellowish. Test on site on building first for possible colour intensification.Products, which can be used together with this product:
-
CONCRETE / STONE GLAZE
Semi-transparent active silicate glaze for mineral surfaces to VOB/C DIN 18363 2.4.1 -
BEECKOSIL FINE
One-pack active silicate system to VOB/DIN 18363 2.4.1. -
SP PLUS
Highly alkaline resistant, longterm preservation of mineral façades -
ETCHING FLUID
Acidic concentrate for sinter skin removal on new renders