BONDING COAT FINE
Siliceous primer coating without texture grain as bonding agentIntended use
Silicification bridge in interior and exterior areas on firm substrates such as stucco, concrete, fibrated cement or highly adherent, existing synthetic resin-based coatings. Further treatment with one-pack BEECK Silicate systems such as Beeckosil.Scope
for exteriors + interiorsProperties
- Highly adherent
- Also on substrates with weak silicification
- Solvent free
- Without texture grain
- White Pigmented
- Water thinnable
Technical Details
W24 value: | 0.10 kg/(m2h1/2) |
Sd value (H2O): | < 0.10 m |
Density (20°C): | 1.40 kg / L |
pH value: | 11 |
Application rate: | approx. 0.14 L / m² per pass on a smooth substrate |
Container size
5 L / 12.5 LColours
Natural white pigmentedProducts, which can be used together with this product:
-
BONDING COAT COARSE
Silicate bonding agent with fine textured grain for substrates with weak silicification -
QUARTZ FILLER
Fibre-reinforced priming coat for opaque or glazed silicate systems -
MBA-FIXATIVE
Special fixative for weakly wettable substrates and for BEECK glazing technique -
FIXATIVE
Priming and binder for BEECK Silicate Paints including BEECK Pure Crystalline Finish -
FORMWORK OIL REMOVER
Water-thinnable cleaning concentrate for removing release agent residues from concrete